FREQUENTLY ASKED QUESTIONS
GENERAL
Does UNITY Tactical comply with California Proposition 65 (Prop 65)?
Yes, at UNITY Tactical we use the Prop 65 short form warning on product packing slips and on our website. We also request notification of Prop 65 chemicals on all purchase orders from suppliers.
Please note that the warning does not mean our products will cause cancer or reproductive harm. Prop 65 may be best defined as a “Right to Know” law, and Prop 65 warnings are not an indication that a product is violating safety standards or regulations. View our Prop 65 Policy Statement.
MARK™
Will MARK work with Howard Leight ear pro?
Yes, but it may require the user to put a slight bend in the wires at the end to provide tension to the clips.
Do the MARKs click out into the open position?
No, but they can be set on the lip of the helmet to allow cooling while still being able to hear comms.
SARA™
Which ear-pro / comms are SARA's required for?
Only MSA Sordin and Sordin derivatives.
The inner cir-clip is really difficult to get off?
Snap ring pliers will make things substantially easier. These are commonly available at most hardware stores including Harbor Freight, Home Depot, etc. In lieu of that, a small flat head screw-driver will work.
What are the ESS Studs?
ESS Studs are required for “Behind the Head” ear-pro / comms only. They replace the rear stud on each ear cup for use with SARA.
VFG™
How Long is the VFG?
Approximately 2.25″
EXO™
Which Lights will EXO work with?
EXO is compatible with the following lights: Surefire X200, X300, X300U-A, X300V. It is not compatible with the new X300U-B (With Thumbscrew Mount). We do not currently make EXO for the Streamlight TLR series lights.
CLUTCH™
What size belt do I need?
Please see the sizing guide located on the product page, or contact us for assistance.
How do I use a kydex holster with CLUTCH?
Most kydex holsters can be used, as long as they are less than 4.5″ wide. Simply remove the existing holster hardware and attach the included self adhesive velcro to the back of the holster and insert into a CLUTCH cell at the desired depth/cant.
FUSION™
"I want to mount a _ _ _ Light alongside a _ _ _ Laser on my rifle. What specific parts are required for this setup?"
No matter your configuration, you will need the Micro Hub. If you are using a Surefire Scout series light (or light that shares that mounting pattern such as the Streamlight Protac Rail) you will not need any additional parts. If you would like to mount a handheld light, you will need the appropriate sized ring mount. If you would like to mount a picatinny rail mounted light, you will need the Offset Rail. If you are using the Micro Hub in conjunction with a Laser device, the Light Wing (Left or Right depending on side) will mount the light alongside the laser system.
If I mount a DBAL to the top of my Micro Hub, will I need any other parts to mount a light?
Yes, you will need a Light Wing for this to work properly.
The screws do not seem to fit?
When the Micro Hub 2.0 was launched, we used different screws. If you have the old screws (larger head) contact us and we will get some of the new screws out to you.
KNUCKL™
Can I mount KNUCKL and MARK on my Team Wendy helmet?
Unfortunately this is not possible. Please use the REMORA for this application.
What is the included velcro dot for?
When KNUCKL is loaded with heavier items (Contour Camera & X300 for example) the velcro dot can be placed on the Contour camera to help secure it to the helmet for the best video experience.
Is the lanyard required?
No, but it will help retain the items in the event of a break-away and is highly recommend for hard use environments.
ATOM™
Do you make an adapter for _ _ _ optic?
The only adapters we currently make include what is up for sale on the site. We are constantly looking at adding new options based on customer demand, so please contact us if you have a suggestion.
Should I adjust the trigger bar?
ALWAYS check trigger cruciform/striker engagement when changing ANY triggers, slides, or frames on your Glock pistol. We highly recommend using a gunsmith backplate (orange) to check and verify proper striker engagement prior to firing any new parts combination. There are tons of articles and videos online with in-depth engagement verification and adjustment instructions.
My adapter plate seems to be too tight?
If your adapter plate does not slide into the dovetail freely, ensure that both adapter and dovetail are clean and free of debris. If it is still too tight, you may need to touch up the mounting surfaces of the adapter with a very fine file or sandpaper. Go slowly and check fit often, and the result will be a perfect gunsmith quality fit. You can see our handy guide here: ATOM Adapter Fitting Guide. If the adapter seems to be extremely oversized, please contact us so we can take a look and make sure everything is in spec.